fem simulator comsol multiphysics 5.5  (COMSOL Inc)

Journal: Scientific Reports

Article Title: Fabrication and thermoelectric conversion of thermoelectric concrete brick with buried unileg N-type CaMnO 3 thermoelectric module inside

doi: 10.1038/s41598-023-28080-7

Figure Lengend Snippet: Computation model of the TEG module and the I-layer brick type of thermoelectric concrete brick using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com ) : ( a ) Schematic diagram of the geometry model, ( b ) finite element mesh of the simulation model, and boundary condition of the model of the simulation model, ( c ) constant hotter temperature and ( d ) electric potential boundary condition at the hotter side of the TEG module and thermoelectric concrete.

Article Snippet: Figure 8 Thermal distribution image of the CaMnO 3 TEG module without a thermal insulator and the thermoelectric concrete bricks of the I-layer brick type and the III-layer brick type upon applying a hot side temperature at 200 °C: ( a – c ) experimental results from the infrared image using Keysight Technologies, U5856A ( https://www.keysight.com/ ), and ( d – f ) computation results from the FEM simulation using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com )

Techniques: Software

Journal: Scientific Reports

Article Title: Fabrication and thermoelectric conversion of thermoelectric concrete brick with buried unileg N-type CaMnO 3 thermoelectric module inside

doi: 10.1038/s41598-023-28080-7

Figure Lengend Snippet: Computation model of the TEG module and the III-layer brick type of thermoelectric concrete brick using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com ) ( a ) Schematic diagram of the geometry model, ( b ) finite element mesh of the simulation model, and boundary condition of the model of the simulation model, ( c ) constant hotter temperature and ( d ) electric potential boundary condition at the hotter side of the TEG module and thermoelectric concrete.

Article Snippet: Figure 8 Thermal distribution image of the CaMnO 3 TEG module without a thermal insulator and the thermoelectric concrete bricks of the I-layer brick type and the III-layer brick type upon applying a hot side temperature at 200 °C: ( a – c ) experimental results from the infrared image using Keysight Technologies, U5856A ( https://www.keysight.com/ ), and ( d – f ) computation results from the FEM simulation using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com )

Techniques: Software

Journal: Scientific Reports

Article Title: Fabrication and thermoelectric conversion of thermoelectric concrete brick with buried unileg N-type CaMnO 3 thermoelectric module inside

doi: 10.1038/s41598-023-28080-7

Figure Lengend Snippet: Thermal distribution image of the CaMnO 3 TEG module without a thermal insulator and the thermoelectric concrete bricks of the I-layer brick type and the III-layer brick type upon applying a hot side temperature at 200 °C: ( a – c ) experimental results from the infrared image using Keysight Technologies, U5856A ( https://www.keysight.com/ ), and ( d – f ) computation results from the FEM simulation using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com )

Article Snippet: Figure 8 Thermal distribution image of the CaMnO 3 TEG module without a thermal insulator and the thermoelectric concrete bricks of the I-layer brick type and the III-layer brick type upon applying a hot side temperature at 200 °C: ( a – c ) experimental results from the infrared image using Keysight Technologies, U5856A ( https://www.keysight.com/ ), and ( d – f ) computation results from the FEM simulation using COMSOL Multiphysics v.5.5 software ( https://www.comsol.com )

Techniques: Software